Q.  I can’t seem to be able to programme my Salus programmer with only the memory back up turned on?

A.  Your Salus programmer requires mains power to enable you to program.

Q.  How do I set the time and date on my Salus programmer?

A. 

• Press the Set and Select buttons simultaneously to enter the clock setting mode.
• By using the “UP” and “DOWN” arrow you can select between 12Hr or 24Hr clock. Once selected press “SELECT”.
• The “HOUR” will now be flashing. Adjust with the “UP” and “DOWN” arrow keys to the desired time. Press “SELECT”.
• With the “MINUTES” now flashing adjust with the arrow keys to the correct minutes. Press “SELECT”.
• Now the “YEAR” will need adjusting. Again use the arrow keys to change and press “SELECT”.
• Now adjust the “MONTH” with the arrow keys and press “SELECT”
• Next to change will be the “DAY OF THE MONTH” again with the arrow keys change and press “SELECT”
• “dLS” will now appear. This is the “DAY LIGHT SAVING” mode to turn “ON” or “OFF” use the “UP” and “DOWN” arrow keys. Now press “SELECT”